![]() ![]() |
|
|
| DTVCity.com : Accessories : Line Doublers |
![]()
Scan Do® Pro II & Pro II/D
SCAN DO ® PRO II is the latest addition to the award-winning line of Scan Do computer-to-video scan converters. Scan Do Pro II combines the higher-resolution support (up to 1280 x 1024) and superior processing offered by Scan Do Select with the professional broadcast-related features and interface found on the original Scan Do Pro model. Designed specifically for professional video and broadcast, Scan Do Pro II features studio-timeable genlock, component output (YUV and RGB formats) and optional SMPTE 259-M serial digital output (SDI). True multi-scanning with support for resolutions up to 1280 x 1024 ensures it will work with virtually any computer. A switchable vertical filter plus a three-line flicker reduction filter produces sharp, stable images and multi-level input zoom processing actually enhances resolution.
Like all Scan Do models, Scan Do Pro II's front-panel controls and interface are designed for user-friendliness. Scan Do Pro II also offers an internal, universal power supply and standard RS-232 remote, bringing convenience and ease-of-use to a new level.
Features Include Offers broadcast-quality scan conversion
Supports up to 1280 x 1024
Input computer sync range from 31 to 71 kHz
Fully timeable genlock with horizontal and subcarrier phasing
Composite, S-video and component (YUV and RGB formats) video outputs in NTSC and PAL
Optional serial digital video output (SDI)
Multi-step zoom with H&V positioning: 0.85x, 1.0x, 1.3x, 1.6x, 2.0x
Internal, universal input power supply; no external brick
Four levels of advanced three-line flicker reduction
Multiple levels of input zoom processing with true increase in resolution when zooming
Switchable vertical filter
Adaptive computer sync processing
Built-in color bar generator
RS-232 remote control
Image freeze
Single cable for VGA and Mac operation
Switchable NTSC or PAL outputs
Optional rackmount kitsApplications
On-air web broadcast
Computer generated graphics
Weather maps and radar
Post-production
Presentation staging
Multimedia events
VideoconferencingSpecifications Equipment Included Scan Do Pro II or Pro II/D
AC line cord
6 ft. VGA/Mac input cable
12 ft. BNC to BNC output cable
12 ft. S-video cable
User ManualInputs Sync frequency range: 31-71 kHz (320 x 200 to 1280 x 1024), analog RGB, non-interlaced resolutions
Input Impedance: RGB - 75 ohms Sync - high impedance
Input Sync Types Supported: Separate H & V, Composite sync (with or without serration), Sync-on-green
Input Loop-through: Passive, self terminating if not used.
Genlock reference input with loop-throughOutput VGA and Mac loop-thru output
YUV, RGB and RGBS component
Serial Digital Video SDI (Pro II/D only)
S-Video
Composite video
Switchable NTSC or PAL timing
Input/Output Connectors HD-15F for Mac input and DB-15F for VGA input (using supplied reversible input cable)
DB-15F for Mac output, HD-15F for VGA output
Composite video output: BNC connector
S-Video output: 4-pin mini-DIN-F
Component/RGBS output: BNC x 4
SDI output: BNC
Genlock: BNC
Remote Control: RS-232 on 3-pin Phoenix type connectorDimensions 7.25 W x 2.5 H x 11 D in. (184.1 W x 63.5 H x 279.4 D mm)
Power Internal universal input AC power supply.
Input: 100-250 VAC, 47-63 Hz, UL/CSA/TUV/CE approved. IEC 320 connector.
Computer and Video Processing Input sampling: 24-bit (8 bits per RGB)
Samples: 720 per line
Computer mode detection: auto measurement
Video processing: 16 bit YUV
Video memory: 720 x 740 x 16 bits (1 video frame)
Video encoding: 16-bit 4:2:2 YUV with 10-bit output D/A
Zoom ratios: 0.85x, 1.0x, 1.3x, 1.6x, 2.0x
Differential gain: < 1%
Differential Phase: < 1 degree
Frequency response: 6.5 MHz (-3 dB)